Rolson Alarm Padlock RL-66857

Rolson alarm padlock RL-66857
100dB two-tone alarm lock
User manual: insert the key and turn clockwise, removing the shackle
Turn the grooved side of the shackle towards the keyhole and place the shackle in its position
The alarm activates within 15 seconds after closing the lock
If the lock is vibrated twice within five seconds, the alarm will activate
A five-second delay allows you to open the lock with the key so that the alarm does not activate
The alarm operates at ten-second intervals
The alarm lasts until the lock is moved or vibrates
The alarm will reactivate after 35 seconds
Please note: the lock can also be used as a regular padlock
To do this, place the grooved side of the shackle into the hole further away from the keyhole
If you use the lock on moving equipment, then use the lock as a regular padlock; if you have stopped the moving equipment (e.g., a bicycle), then use the lock as an alarm padlock
Setup: remove the shackle and unscrew the screws in both openings
Remove the bottom cover of the lock
Insert the batteries into the compartment, put the lock cover back on and tighten the screws again
The lock requires 6xLR44 batteries to operate (included)